Submersible sand pump with agitator is also known as submersible slurry pump with agitator in which the sand pump and the driving motor are coaxially designed to run stably. The bottom of the slurry pump body is equipped with a stirring impeller. The impeller can stir the deposited sludge to form a turbulent flow and achieve high concentration transportation. The submersible sand pump with agitator is directly submerged into the water, so the need to infuse the water is greatly eliminated. The operation is relatively simple.

The OCEAN Pump brand ZJQ series submersible sand pump with agitator is made of high quality wear resistant alloy material precision casting. This pump is widely used in the tailings pond cleaning, sedimentation tank extraction of coal slime, dredging river channel in the middle and lower reaches of the Yellow River and dredging of inland river channels.

Submersible Sand Pump With Agitator Selection Background

The client had signed a contract for a river dredging construction project, which required the river silt to be cleaned with depth of 8-10 meters and length of 10 kilometers. At present, the bottom silt layer was hard and sticky. The client has tried the traditional shooting and suction method to extract silt, but the efficiency was low and the desilting effect was not ideal. Then he consulted with our sales engineers for a more appropriate approach.

submersible sand pump for hard mud extracting
submersible sand pump for hard mud extracting
submersible sand pump for hard mud extracting

According to the customer requirements, our company’s technical personnel suggest to choose the submersible sand pump ZJQ150-22-22 according to our construction experience of similar projects,  the submersible sand pump ZJQ150-22-2 can be equipped with two agitators to stir the bottom hard mud layer, improve the mud content in the water, facilitate the extraction of submersible mud pump, and make construction plans for the customer.

Submersible sand pump with agitator parameters

  • Flow: 150m3/h
  • Head: 22m
  • Power: 22KW
  • Agitator on both sides: 8KW (single unit 4KW)

By watching the production video of this type of submersible sand pump with agitator, the customer compared the solutions provided by other companies, and finally selected the pump type solution provided by our company. The customer explained that the reason for choosing our company’s mud pump was that the submersible mud pump produced by our company has been produced on site. Our submersible sand pump is relatively mature and stable, and the investment is not very high, then customer can recover the investment cost as soon as possible.

According to request, our company provided customer with a complete construction solution, which made the customer feel very surprised and satisfied. Through the program, the probability of the customer’s late problems was reduced, and the customer could prepare as early as possible. The customer was going abroad to work, and at the same time signing the contract, the purchase of accessories had also been added.

submersible sand pump for hard mud extracting
submersible sand pump for hard mud extracting
submersible sand pump for hard mud extracting

After signing the contract, our company immediately organized the production, and finished the production debugging within a week, and informed the customer to accept the delivery. The customer judged that the submersible sand pump was in good condition and could be delivered by calling video and watching the trial video.

Tai’an Ocean Pump Co., Ltd. is engaged in the development, production and marking of submersible sand pump with agitators, sediment pumps, sand suction pumps, dredging pumps, mud pumps and other equipment for nearly 20 years, providing not only product and industry solutions, but also on-site installation. Service, please contact us at any time regarding the design and equipment of dredging and sand pumping.